Master-force 252-8036 Manual del operador descargar pdf (Pagina 10)

Page 9

OPERATION

COLD WEATHER OPERATION

When the battery pack is very cold, it may

“pulse” for the ﬁrst minute of use to warm

itself. Put the battery pack on a tool and use

the tool in a light application. After about a

minute, the battery pack will have warmed

itself and will operate normally.

WHEN TO CHARGE THE

BATTERY PACK

The Lithium-Ion battery can be charged at

any time and will not develop a “memory”

when charged after only a partial discharge.

It is not necessary to run down the battery

pack charge before recharging. Remove

the battery pack from the tool when it is

convenient for you and your job.

1. Use the power indicator to determine when

you need to recharge the battery pack.

2. You can “top-off” your battery pack’s

charge before starting a big job or long

period of use.

3. Due to Lithium-Ion’s fade-free

properties, the only time it is necessary

to charge the Lithium- Ion battery pack

is when the pack has reached the end of

its charge. To signal the end of charge,

power to the tool will drop quickly.

Charge the battery pack as needed.

HOW TO CHARGE THE BATTERY

PACK (FIG. 3)

A fully discharged battery pack will charge

about 30 minutes (with charger 252-8037) in

the desired surrounding temperature.

1. Charge the battery pack with the correct

charger.

2. Connect the charger to a power supply .

3. Attach the battery pack to the charger

by aligning the raised ribs of the battery

pack with the slot in the charger. Slide

the battery pack onto the charger.

4. The charger will communicate with the

battery pack’s circuitry to evaluate the

condition of the battery pack.

5. During normal charging, the green LED

on the charger will ﬂash continuously.

6. After charging is complete, the green

LED on the charger will be on. The

power indicator LED lights will not be

displayed when the power indicator

button is pressed while the battery pack

is on the charger.

7. The battery pack will fully charge, but

will not overcharge, if left on the charger.

FIG. 3

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Comentarios a estos manuales

Sin comentarios