Master-force 241-0854 Manual del operador descargar pdf (Pagina 14)

Page 13

OPERATION

236-0851 236-0852 236-0853 236-0854 236-0855

236-0856 236-0857 236-0858 236-0859 236-0863

236-0864 236-0865 236-0866 236-0867 236-0868

236-0869 236-0870

ATTACHING THE APPLICATION ACCESSORY

USED FOR UTILA-TOOL 241-0853

The Utila-Tool can be used with Fein

brand oscillating tool accessories and Menards accessories.

The model numbers for the Menards Utila-Tool 241-0853 accessories are listed in the following table.

1. Disconnect the tool from the power source.

2. Push the quick-release lever fully open

with your palm to loosen the ange bolt

(Fig. 5). Remove the ange bolt.

3. Loosen the two screws in the adapter,

and remove the screws and the adapter

(Fig. 9). Place the attachment in a safe

place for future use.

4. Ensure that the inner threads and the

drive shaft are clean.

5. Align the grooves on the application tool

with the four raised ribs on the drive

shaft. Put the application tool onto the

drive shaft (Figs. 10 and 11).

6. With your gloved hand holding the

application tool, insert and depress

the flange bolt until you hear a click

indicating that the application tool is

secured.

7. Press the quick-release lever with your

palm to lock the drive shaft.

FIG. 9

FIG. 10

FIG. 11

Screws

Rib

Groove

NOTICE: Attach the Fein

brand

application tool at the desired orientation

for the task at hand. The shaft is

congured so that the application tool can

be attached at 45° intervals around the

shaft, from 0° to 315°.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 23 24

Comentarios a estos manuales

Sin comentarios

Master-force 241-0854 Manual del operador Pagina 14

Comentarios a estos manuales

Relacionado con productos y manuales para Herramientas Eléctricas Master-force 241-0854