Master-force 241-0431 Manual del operador descargar pdf (Pagina 16)

METAL CUTTING

The saw can be used to cut metals, such as sheet steel, pipe, steel rods,

aluminum, brass, and copper. Be careful not to twist or bend the saw blade.

Do not force.

The use of cutting oil is recommended when cutting soft metals and steel.

Cutting oil will keep the blade cool, increase cutting action, and prolong

blade life.

WARNING! Never use gasoline, because normal sparking could ignite the

fumes.

1. Securely clamp the workpiece in position, and make the cut close to the

clamping point in order to minimize vibration of the work being cut.

2. When cutting conduit pipe or angle iron, clamp the work in a vise, if

possible, and cut close to the vise.

3. To cut thin sheet material, “sandwich” the material between pieces of

hardboard or plywood, and clamp the layers together in order to reduce

vibration and tearing of the material.

1 2 ... 11 12 13 14 15 16 17 18 19

Sin comentarios

Master-force 241-0431 Manual del operador Pagina 16