Master-force 241-0303 Manual del operador

Operator’s Manual12.0-Volt Lithium-Ion Impact Driver241-0303 IMPORTANT :WARNING! To reduce the risk of injury, user must read instruction manual. Safe

10DESCRIPTIONKNOW YOUR IMPACT DRIVER (Fig.1)PRODUCT SPECIFICATIONSMotor 12 Volt DCSwitch VSR (Variable Speed Reversible)No Load Speed 0-2200 RPMImpact

11VARIABLE SPEEDThe variable-speed trigger switch delivers higher speed with increased pressure and lower speed with decreased trigger pressure.FORWAR

12OPERATIONBATTERY PROTECTIONThe battery circuitry protects the battery pack from extreme temperature, over discharge, and over-charge. To protect the

135. The charger will communicate with the battery pack to evaluate the condition of the battery pack.6. The green LED lights on the charger will fla

143. If a different battery pack also indicates “defective,” the charger may be defective.BATTERY CHARGINGIf the battery pack is being charged within

15TRIGGER SWITCH (Fig. 5a)To turn the impact driver ON, depress the trigger switch. To turn it OFF, release the trigger switch.VARIABLE SPEED (Fig.5a)

16LED WORKLIGHT (Fig. 6)The LED worklight, located on the front of the Impact Driver, will illuminate when the trigger switch is depressed. This provi

17NOTE: This driver is equipped with an electric brake. When the brake is functioning properly, sparks may be visible through the vent slots in the ho

18BATTERY PACK REMOVAL AND PREPARATION FOR RECYCLINGTo preserve natural resources, please recycle or dispose of batteries properly. This product conta

19WARRANTY3-MONTH MONEY BACK GUARANTEE:This MASTERFORCE™ brand power tool carries our 3-Month Money Back Guarantee. If you are not completely satisfie

2TABLE OF CONTENTSSafety Symbols ...Page 3Safety Instructi

20

3SAFETY SYMBOLSThe purpose of safety symbols is to attract your attention to possible dangers. The safety symbols and the explanations with them deser

4SAVE THESE INSTRUCTIONSSome of these following symbols may be used on this tool. Please study them and learn their meaning. Proper interpretation of

5SAFETY INSTRUCTIONSGENRAL SAFETY RULES WARNING: Read all safety warnings and instructions. Failure to follow the warnings and instructions may resul

6PERSONAL SAFETY Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use tool while tired or under the influ

7 Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.

8 Do not operate the tool at full-load for more than 30 seconds, as this can cause the motor to become too hot, which may damage the motor. Release

9 An extension cord should not be used unless absolutely necessary. Use of an improper extension cord could result in a risk of fire and electric shoc